Friday, 10 July 2015

How Does Computer Support Help in Resolving 0x00000050 Windows Error While Replacing TCP/IP?

Microsoft carries the distinction of selling the maximum copies of its Windows operating system worldwide that shows the quality and benefits it offers. Your Windows running PC offers you excellent productivity and reliable support for all your office and home-related requirements. But even your most reliable PC can sometimes create trouble and put a halt on your productivity temporarily. However, there is no such Windows errors that you can’t get fixed, but it is imperative to act swiftly to prevent major damages to your software and hardware components. One such critical Windows error is 0x00000050 that you may face while you replace TCP/IP on your PC. 


 We usually press the panic button when we face issues with our PCs, but that is not the right approach to get things back on the track. The right way of getting the issue fixed is to approach a professional technical support service. In the modern era of advanced technology, everything is getting available online, and the technical support is not an exception to it. By just dialing a toll-free number you get quick resolution for all your computer problems. So if you are facing error messages and looking for reliable computer solutions then search a leading tech support company and speak to the technician, for a quick resolution. This is how, the latest computer support service comes to your rescue if you are facing 0x00000050.

Errors and issues are not limited to Windows operating systems only, and users may face issues even when they are using Mac OS X and Linux. However, it is very difficult to prevent these errors entirely but with periodic and regular computer maintenance, you can prevent such issues, to a considerable extent. Regular computer maintenance practices help you keep your PC optimized and free from temporary Internet files, unnecessary caches, redundant programs, and not so necessary startup programs. So if you want to your PC to work optimally, then never skip your PC maintenance routine.

In the current blog post, you will get vital information regarding symptoms, causes, and troubleshooting steps to resolve the 0x00000050 error. 

Symptoms 

 
You receive any of the following STOP error messages if you remove the TCP/IP protocol and then add TCP/IP to the system. It usually takes place on a Windows NT 4.0 PC that that Service Pack 2 (SP2) earlier.
STO

P 0x00000050 (0xFF10c004, 0x0, 0x0, 0x0) PAGE_FAULT_IN_NONPAGED_AREA
-or-
STOP 0x00000050 (0xFF404004, 0x0, 0x0, 0x0) PAGE_FAULT_IN_NONPAGED_AREA
-or-
STOP 0x00000050 (0xA0133004, 0x0, 0x0, 0x0) PAGE_FAULT_IN_NONPAGED_AREA

Here you must have in your mind that the arguments may change in these error messages but the error code will remain same in all the cases mentioned above. 

 

Cause of the Error 


You face the error when you install or configure the Remote Access Service to use the TCP/IP protocol. You install the service to use the protocol as either a dial-in or a dial-out protocol. 

How to Resolve the Error?


Here comes the most critical component of the entire blog. Now you are going to learn about the troubleshooting steps to resolve the error. If you face the error after adding the TCP/IP protocol back to the system, then you need to do one of the following things. 

You need to reapply SP2 once you finish adding the TCP/IP protocol back to your PC. But you need to do it before you reboot your PC. After adding TCP/IP, you should click NO when you get prompt for a reboot.
In another case, you need to disable TCP/IP from your RAS configuration, once you finish adding the TCP/IP protocol. After disabling TCP/IP, you need to reboot your computer. Now reapply SP2 and then enable TCP/IP through RAS. 

Now you need to use either of the following methods to resolve the issue, depending on the case. 

Method One: 


The method is applicable for Windows NT that is on a FAT partition. If the affected PC has Windows NT installed on a FAT partition, then you need first to boot your PC into another operating system such as MS-DOS, Windows 95 or Windows 3.x. Furthermore, you need to replace the Tcpip.sys file in the \Winnt\System32\Drivers folder with the one from Service Pack 2. 

 

Method Two 


You should choose the method if your PC has Windows NT on an NTFS partition. You need to install a parallel copy of Windows NT 4.0 in a new directory if your PC has Windows NT on an NTFS partition. In this method also, you need to replace the Tcpip.sys file in \Winnt\System32\Drivers folder with the one that you have with SP 2. Now reboot the original Windows NT installation and then reapply SP2. Now reboot the PC to the original Windows NT installation and then you need to reapply the SP2. Once you are done with it, delete the parallel installation of Windows NT 4.0. 

Conclusion


Windows errors are common, and you can easily troubleshoot it if you know the process precisely. Considering the complexities of fixing the Windows errors, it is imperative to get your PC fixed only by a professional computer technician. So if you are facing the 0x00000050 Windows error then either try the above tips or call a professional computer support service.

No comments:

Post a Comment